F550-8TD optical collimator for laser,have a good price
Angle of field:
Length of the lens barrel:
10000 Piece/Pieces per Week
Packaging & Delivery
one piece packed in one carton
2-3 working days after payment confirmed
High accuracy F550-8TD optical collimator for laser,have a good price
Number of parallel light pipes:nine in total
Three on the top base(in low angle,horizontal angle and high angle respectively,and the horizontal one also used for horizontal view together with the four on the horizontal plate;
Four on the horizontal plate(two for left view and two for right view together with the four on the horizontal plate;
One looking vertically up(two for left view and two for right view respectively)
One looking vertically down(for testing the optical plummet)
Angle setting of parallel light pipes: Vertical angle:120° low angle, 90° horizontal angle, 60° (±30') high angle, 0° for the one looking vertically up Horizontal angle :0° and 45°for left view, 135° and 180° for right view(±30‘)
Length of the lens barrel
Scale value of the cross-hair board
Effective adjustable range of parallel light pipes:the horizontal axis:>=60',the vertical axis:>=60'.
The center spiral to connect and hold the equipment to be calibrated are suitable for screws of both English and metric measurements
Max. range of adjustment for up-down worktable:>=350mm(including the lens aperture)
Angle of field
Sensitivity of the level at the base
green cold light source(can be fine-tuned)
The packing and categories
Model W550-8TD is a large floor type calibration instrument.For the convenience of installation and the safety of transportation, its components are packaged separately. There are in all five packages, namely : the large floor base,the top base,the left part of the horizontal plate,the right part of the horizontal plate,and the light pipe at the vertical top.
1. The top base and the three parallel light pipes(The upper,middle and lower pipes are numbered as A1,A2, and A3
2.The large floor base,the up-down spiral rod and the round worktable etc..
3.The left part of the geometrical plate,and the support column under the plate.
4.The right part of the geometrical plate,and the support column under the plate
[The power transformers of all parallel light pipes are installed underneath the geometrical horizontal plate.]
5.The light pipe at the vertical top.
[All installation tools and accessories]
Considering that the instrument is a large floor type one, please spare enough space before installation and use. The following size of floor space is for your reference :130cm from front and rear, 230cm from left to right,and the height is about 235cm. However, in actual situation, a certain free space should be spared,no less than 2m x 3m around the instrument, otherwise the left and right part of the horizontal plate would be collided during operation due to limited space.In this case,the correctness and steady precision will be affected.
The procedure and Method of Installation
Choose a place to put and install the instrument, and then decide the space for the calibrator.W550-8TD is a very stable floor type instrument, so once installed,it is very hard to move it. You may want to arrange the lighting and the storage table for devices before installation of the instrument.
1.Any inquiries will be replied within 12 hours.
2.All our products have one year warranty, And we sure the products will be free from maintenance within warranty period.
3.All products will have been strictly quality checked in factory before sending out.
Terms of payment
Generally, we accept Trade Assurance, Irrevocable LC at sight, Advance T/T, Paypal, Escrow and West union.If you prefer other
payment terms, please let us know.
Packaging & Shipping
We have strong cooperation with DHL, TNT, UPS, FEDEX, EMS,China Air Post.